The BT A2DP will refer to Bluetooth - Advanced Audio Distribution Profile and to disable this, you will need to go into the Bluetooth settings on your Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A. This is a fairly long process to type out, so I included an image from the instructions that will get you all squared away. view full answer...
I spoke to Command Electronics and they indicated that the LED board is most likely going bad if you are getting a strobe effect with the LED RV Interior Light with Switch part # 328-K-1030WSM2. Unfortunately, the LED board is not replaceable so you would need to replace the entire light. In order to remove the lens you would want to take a butterknife and use it to pry between the outer edge of the lens and trim piece. You will then have access to the mounting screws needed to remove it... view full answer...
Go To Results